High resolution optics
Resolve surface details as small as 0.53 µm on single fiber connectors and 1.4 µm on multi-fiber connectors.
Detailed 2D/3D surface profiles
The 3D surface view enables you to see the volume image of the fiber and the ferrule
and to examine surface details.
Largest field of view up to 5700 µm
Measure connectors from guide hole to guide hole.
High contrast optics
Inspect buffer zones, materials with different reflectivity (e.g. metal ferrule and plastic fiber).
Minimize operator’s actions to just one click.
*available with MAX-QS+, MAX-QM-B+ and MAX-QM+ modification
Measure single fiber connectors in 1 second and multi-fiber connectors in 6 seconds.
Versatility of tasks
Test single fiber and multi-fiber ferrules and patchcords along with bare ferrules, cleaved bare fiber and flat polish connectors.
High resolution anomalies detection*
Identify scratches as small as 0.53 microns.
* MAX-QS, MAX-QS+, MAX-QM-B, MAX-QM-B+
Visually inspect connector end face prior to measurement
Forget about tedious every-day calibration.
Inspect single and multi-fiber connectors, ferrules, mechanically and laser-cleaved bare fibers, MS termini, both PC and APC.
50 µm scan range
Measure large height differences.
Automated inspection software
Measure radius of curvature, apex offset, fiber height, core dip, etc.
Easy report generation and data archival
Prove quality of your connectors.
Compliance to industry standards
Test per IEC, Telcordia or your own Pass/Fail criteria.